2013 BMW M5

The auction lists the primary damage as rear damage. Stage 1’s photo-based assessment supports this claim: the rear bumper cover shows extensive scratches and scuffing, several cracks and split areas, a missing rectangular section in the lower-right area, and visible separation from the rear quarter panels and tail-lamp areas at both side corners. The damage findings are concentrated on the rear bumper cover. Repair may require replacement or substantial restoration of the cover, along with inspection of the bumper mounting points, adjacent body panels, lighting components, and any parts behind the missing section. The provided findings do not confirm damage to those underlying components. VIN decoding identifies the vehicle as a 2013 BMW M5 sedan manufactured by BMW M GmbH in Dingolfing, Germany. It is equipped with a 4.4-liter gasoline V8 engine; the decoder lists an engine output of 553 hp. Drivetrain and transmission details were not provided. The supplied recall information includes campaign 12V475000 for certain 2013 BMW M5 vehicles manufactured from July 19, 2012, through September 11, 2012. The recall concerns a possible engine oil-pump drive-shaft separation that could cause sudden loss of oil pressure and engine failure; the remedy was replacement of the oil pump at no charge. The vehicle’s production date and recall-completion status were not provided, so this should be verified with BMW using the VIN. The supplied data also includes campaign 15V188000 concerning rear reflex reflectors on certain 2013 5-Series models. Its applicability to this M5 and its completion status should be confirmed with BMW.