2016 BMW M4

The auction record identifies the vehicle as having a SALVAGE CERTIFICATE and lists REAR END as the primary damage. Stage 1 reports that the visible rear bumper removal and rear quarter-panel deformation support the stated REAR END claim; however, the SALVAGE CERTIFICATE status cannot be confirmed from the photos. The visible damage is concentrated at the rear and is classified as severe. The exterior rear bumper cover is missing, exposing the bumper reinforcement, inner bumper components, mounting hardware, wiring, and exhaust area. The lower rear bumper trim or diffuser is also absent. Multiple electrical wires and harness sections are visibly hanging beneath the exposed rear bumper and will require careful inspection and secure restoration. The driver-side rear quarter panel and wheel-arch area show pronounced deformation and creasing extending from the rear corner toward the wheel arch. Blue paint is scraped or missing, with lighter-colored material visible along the damaged edge. The extent of the quarter-panel deformation warrants inspection of the adjoining body structure, wheel-arch area, mounting points, rear alignment, exhaust system, and electrical components before any repair estimate is considered complete. Mechanical, structural, and electrical condition cannot be established from these findings alone. VIN decoding identifies this vehicle as a 2016 BMW M4 convertible, manufactured by BMW M GmbH in Germany. It has a 3.0-liter, six-cylinder gasoline engine; the decoded data lists 425 horsepower. Transmission and drivetrain details were not provided by the decoder. NHTSA records list three BMW recall campaigns associated with the relevant M4 model and model years. Campaign 18V713000 concerns a possible driveshaft-to-flange connection failure, which can result in loss of propulsion. Campaign 16V653000 concerns potentially reused rear subframe bolts that may loosen and affect handling. Campaign 15V782000 concerns an insufficiently greased driveshaft slip joint that may fail over time. Applicability to this specific VIN, including production-date requirements and completion status, should be verified with BMW or an authorized dealer.