2025 BMW M340I

The vehicle is listed with a **SALVAGE CERTIFICATE** and **SIDE** as the auction’s primary-damage classification. Stage 1 reports that the SIDE claim is supported by extensive visible damage on the left side, including missing body components, scraping, and deformation, with additional damage at the left rear corner. The SALVAGE CERTIFICATE status cannot be confirmed from photographs. Visible damage includes: - The left front fender is missing, exposing the wheelhouse, mounting areas, and adjacent inner body components. - The left front door window glass is absent. - The left front door and lower left side have extensive white scrape marks and paint abrasion, with localized deformation and uneven contouring in the lower door area. - The left rocker-panel trim or molding is missing, exposing the sill and mounting points. - The left rear outer tail-lamp assembly is missing, leaving an open cavity with internal components visible. - The sheet metal around the left rear tail-lamp opening is severely deformed, with irregular and crushed edges. - There is a pronounced gap between the left rear bumper cover and the adjacent quarter-panel area. The provided VIN decodes as a 2025 BMW M340i sedan with a 3.0-liter six-cylinder gasoline engine rated at 386 hp. The vehicle was manufactured by BMW AG at the San Luis Potosi plant in Mexico. Factory data identifies standard features including ABS, electronic stability control, traction control, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, and curtain, front, side, and knee airbags. The drive type and transmission are not specified in the supplied decode. A complete physical inspection is recommended to assess structural alignment, suspension and wheelhouse components, wiring, lighting systems, door and window mechanisms, airbag and restraint systems, sensors, and any damage not visible in the provided images.