2024 BMW I5 eDrive40

The vehicle is a 2024 BMW i5 eDrive40 sedan, VIN WBY33FK04RCP96220. It is a battery-electric vehicle manufactured by BMW AG in Germany, with a listed output of 335 hp. The auction record identifies the vehicle as having a salvage title, with FRONT END listed as the primary damage. The visible missing and removed front bumper, grille, and headlamp assemblies, together with the exposed front-end components, support the stated FRONT END damage code. The salvage-title status cannot be confirmed or disproved from the provided images. The front bumper cover and grille assembly are absent. Both front headlamp units are missing, leaving open cavities, wiring, connectors, mounting hardware, and other radiator-area components exposed. The front end is open below the hood, and the condition of concealed structural, cooling, electrical, and high-voltage systems is not established by these findings. Rocker-panel or lower side-skirt trim is missing along the visible side of the vehicle, exposing mounting points and the lower attachment rail. A rear lamp assembly is also absent, leaving an open lamp cavity and a dangling electrical connector. The findings document substantial missing exterior and lighting components, but they do not establish the operational condition of the vehicle, its electric drive system, high-voltage battery, braking system, driver-assistance systems, or the extent of any concealed damage. A comprehensive physical inspection and diagnostic scan are recommended before purchase. NHTSA recall records list the following recalls for applicable 2024 BMW i5 vehicles: recall 23V700000 concerns an incorrectly attached steering-wheel ground connection that may disable hands-on detection; recall 23V885000 concerns failure of the external pedestrian warning sound; recall 24V104000 concerns possible integrated-brake-system malfunction affecting power brake assist, ABS, and Dynamic Stability Control; recall 24V135000 concerns insufficient weld seams in a high-voltage battery module that may cause overheating; recall 24V697000 concerns integrated-brake-control-module weld failures that may affect braking, ABS, and stability control; recall 25V395000 concerns electric-drive-motor software that may shut down the high-voltage system and cause loss of drive power; and recall 26V422000 concerns a potential integrated-brake-system malfunction. Recall repair completion and applicability to this specific VIN should be verified with BMW or NHTSA.