2013 BMW 750 750Li/Alpina B7

The vehicle is listed with a salvage certificate of title, and the auction’s primary-damage code is “BURN.” The auction code requires physical inspection and cannot be confirmed or ruled out from the provided photos; however, extensive charring, melting, and heat-discolored material is visibly present. The front end has severe damage. The bumper cover, grille surrounds, lower fascia, headlamps, hood, front fender, radiator-area supports, brackets, wiring, and related components are broken, displaced, deformed, or missing. The hood is heavily creased at the front edge and corners, with large gaps exposing the engine compartment. Loose and broken plastic components are visible around the front of the vehicle. Extensive blackened, melted, charred, and heat-discolored material is visible throughout the engine compartment and forward cabin area. Wiring, hoses, covers, radiator-area components, and other engine-bay parts are exposed, damaged, or partially missing. The extent of damage means that the condition of the engine, cooling system, electrical system, and front structure cannot be determined from the provided findings. The passenger compartment is severely damaged or stripped. The front seats, dashboard trim, center-console components, interior coverings, and other furnishings are absent or reduced to heavily damaged and charred remnants. Exposed wiring, damaged metal panels, and discolored residue are visible across the cabin. Multiple side windows and the roof glass are missing. The roof, roof opening, roof perimeter, rails, and exposed framing show extensive discoloration and damage. Both sides of the body have severe heat-discolored and damaged surfaces. The left and right front and rear doors, B-pillar areas, left front fender, and adjacent cabin openings are affected, with damaged or missing window glass and exposed interior structure. The roof and side body areas show blackening, peeling, and damaged material. The rear also has significant damage. The trunk lid is crushed and folded inward around the emblem and license-plate area, while the trunk opening and adjacent rear panel are distorted with displaced edges and gaps. The lower rear bumper remains present but has visible scuffing and dirt. VIN decoding identifies this vehicle as a 2013 BMW 750Li/Alpina B7 sedan, manufactured by BMW AG in Germany. The decoded specifications list a gasoline 4.4-liter V8 engine, with the output range shown as 448–540 horsepower depending on the 750Li or Alpina B7 configuration. The VIN identifies a long-wheelbase model, but the available data does not establish which specific trim applies. Overall, the vehicle presents severe front-end, engine-compartment, roof, cabin, side-body, and rear damage, including extensive heat-affected material and numerous missing components. A complete physical inspection is essential before any assessment of structural integrity, mechanical condition, electrical systems, safety equipment, repair feasibility, or roadworthiness.