2025 BMW 740

The vehicle is listed with an auction condition of “Salvage Certificate” and a primary damage classification of “SIDE.” These are auction designations and should be independently verified. Stage 1 assessed that the extensive damage to the left front door, missing left side mirror, and missing rocker trim supports the stated SIDE classification. The salvage-certificate status could not be confirmed from the photos. The documented damage is concentrated on the left side. The left front door outer panel has severe deformation and extensive white surface scraping around the handle and middle section. The exterior side mirror is missing, leaving its mounting area exposed. The rocker-panel trim below the doors is also missing, with mounting points and lower sill components exposed. Inside, the left rear door is missing its interior trim panel, exposing the door structure, speaker, wiring, and operating components. Two interior door panels, along with additional door mechanisms, wiring, and hardware, are shown removed and placed outside the vehicle. The extent of damage to the removed components and the condition of the exposed electrical and operating systems require physical inspection. According to the NHTSA VIN decode, VIN WBA23EH00SCT24226 identifies a 2025 BMW 740i sedan manufactured by BMW AG in Dingolfing, Germany. It is specified with a 3.0-liter six-cylinder gasoline engine and a listed output of 375 horsepower. The decode also lists standard equipment including adaptive cruise control, blind-spot monitoring and intervention, lane-centering and lane-keeping systems, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, curtain and side airbags for the first and second rows, and direct TPMS. No factory options were provided in the available data.