2013 BMW 650

The auction record lists the vehicle as “CERT OF TTL-SLVG MANUFCTR BYBK” and identifies the primary damage as “SIDE.” Stage 1 reports that the visible evidence supports the unverified SIDE damage claim, with severe collision damage clearly visible on the left rear door and rocker panel. However, Stage 1 did not independently verify the salvage-title or manufacturer-buyback claim. The left rear door is severely crushed, with extensive sharp creasing across the outer panel, deep deformation around the handle, and heavy damage to the lower section. The left rocker panel beneath the doors is also severely crushed and scraped, with irregular deformation extending below both the front and rear door area. Additional moderate damage is present at the rear-door edge, the adjacent door junction, and the lower left-side body, including creasing, abrasions, and disrupted panel surfaces. Because the rocker panel is substantially deformed, the vehicle should undergo a qualified structural and mechanical inspection before purchase, including checks of the door structure, hinges and latch, rocker and floor areas, side-impact safety components, and alignment. VIN decoding identifies this vehicle as a 2013 BMW 650i sedan, manufactured by BMW AG in Dingolfing, Germany. It is specified with a 4.4-liter gasoline V8 engine and a decoded output of 440 horsepower. The VIN data also lists curtain airbags for the first and second rows, front and knee airbags, pretensioners, manual seat belts, and direct TPMS. No factory options or drivetrain or transmission details were provided.