2016 BMW 640

The vehicle is listed with a salvage title, with the auction’s primary-damage classification recorded as “FRONT END.” Stage 1 reports that the visible evidence supports the “FRONT END” classification through extensive front-end collision damage; however, the salvage-title status cannot be confirmed from photographs. The most significant damage affects the front bumper and grille area. The bumper cover and attached kidney-grille panel are displaced forward and downward, leaving a large opening across the upper front fascia and exposing internal front-end components. Sections of the upper bumper fascia are broken or missing, and the bumper edges are separated from the surrounding body panels. The front-left bumper corner and lower fascia are torn and heavily scuffed, with scraped paint and an irregular hanging lower edge. The front-left fender is deformed beside the headlamp, with scraped paint and exposed or separated material along the front corner. The leading edge of the hood has an uneven contour and irregular gaps above the grille and headlamp areas. Surrounding trim and bumper material around the front-left headlamp are missing or broken, although the headlamp lens itself appears to be present. The open front fascia exposes radiator-area components, brackets, wiring, and bumper mounting areas that would normally be covered. Minor cosmetic damage is visible inside the cabin, including white abrasion marks and linear scuffs on the rear-seat center armrest and adjacent black leather surfaces. According to the NHTSA VIN decode, this is a 2016 BMW 640i coupe manufactured by BMW AG in Germany. It is equipped with a 3.0-liter, six-cylinder gasoline engine rated at 315 horsepower. The decoded VIN is reported as clean, with a valid check digit. The damage shown warrants a detailed inspection of the front structure, cooling system, wiring, lighting, restraint systems, suspension, alignment, and all associated mounting points before repair or purchase.