2016 BMW 640 GC

The vehicle is listed with a salvage vehicle title and the auction’s primary damage classification is FRONT END. Stage 1 reports that the visible hood and bumper damage supports this front-end classification; however, the salvage-title status cannot be confirmed from the available exterior and interior photographs. The front hood has a visibly uneven leading edge, irregular gaps around both headlamps, and a raised section near the left side. The left front hood corner does not sit flush with the adjacent fender and headlamp. The left front bumper shows scraped paint and surface abrasion, with additional damage along the lower edge. A circular opening on the left side of the bumper is uncovered, indicating that a bumper cover or insert is missing. Minor cosmetic damage is also visible on the left rear door edge and adjacent left rear quarter panel, consisting of light gray scuff marks and streaks. The steering-wheel airbag and front passenger dashboard airbag are visibly deployed. Another white airbag cushion is visible below the driver-side dashboard. The instrument cluster displays multiple warning indicators, including check-engine, ABS, brake, parking-brake, tire-pressure, restraint, and stability-related warnings. The cause and extent of any associated electrical, braking, restraint-system, or mechanical faults cannot be determined from the provided findings and should be assessed through a full physical and diagnostic inspection before purchase. VIN decoding identifies the vehicle as a 2016 BMW 640i GC sedan, manufactured by BMW AG in Germany. It is specified with a 3.0-liter six-cylinder gasoline engine and a reported output of 315 horsepower. Safety equipment data includes front, side, curtain, and knee airbag locations, as well as driver and front-passenger pretensioners.