2018 BMW 540I

The auction lists the primary damage as Front End. Stage 1’s assessment supports this classification, reporting extensive visible deformation and breakage at the hood, grille, bumper cover, and headlamp areas. The hood is severely buckled and creased across the front edge and center section, and it sits unevenly above the grille and headlamps. The front kidney grille is severely broken and displaced, with separated trim, irregular gaps, and exposed components behind it. The front bumper cover has moderate deformation, scraping, fractured-looking areas, and irregular openings around the center and left side. Both headlamp areas show moderate displacement, with uneven gaps between the lamps, hood, grille, and bumper. These findings indicate substantial front-end collision damage and warrant inspection of the underlying support structure, lighting components, cooling system, and related systems before repair or operation. Several light surface scratches are also visible on the trunk lid below and to the right of the rear spoiler. The VIN decode identifies this vehicle as a 2018 BMW 540i sedan manufactured by BMW AG in Germany. It is specified with a 3.0-liter six-cylinder gasoline engine rated at 335 horsepower and an eight-speed automatic transmission. The vehicle is listed with left-hand drive, four doors, five seats, and 18-inch wheels. Two NHTSA recall campaigns are listed for this model year and model range. Campaign 18V465000 concerns incorrect crankshaft-sensor firmware, which may cause the engine to stall; the listed remedy is replacement of the sensor. Campaign 19V684000 concerns the rear-view camera image not remaining visible when the vehicle is placed in reverse; the listed remedy is a software update. Recall applicability and completion should be verified by VIN with BMW or an authorized dealer.