2022 BMW 540

The vehicle is listed with a salvage vehicle title, and the auction identifies the primary damage as front-end damage. Stage 1 reports that the visible evidence supports the unverified front-end damage claim: the front bumper cover, lower valance, and center grille show separation, abrasion, and breakage. The salvage-title status cannot be confirmed from exterior photographs alone. Visible exterior damage is concentrated at the front. The bumper cover has extensive light-colored abrasion and surface scuffing across its face, with heavier scraping at the left front corner. The lower bumper cover and valance are severely separated, hanging downward with an irregular broken edge and exposed underlying areas. The center kidney grille has irregular and displaced vertical slats, broken-looking openings, and missing or separated portions along the lower section. Additional separation is visible at the right front corner, where the bumper cover has pulled away from the adjacent fender and wheel-opening area, leaving gaps and an exposed fastener area. There is also a visible gap between the bumper cover and the adjacent body panel on the right side. Both front airbags are visibly deployed. The driver’s steering-wheel airbag is extended from the wheel center, and the passenger airbag fabric is extended from the passenger-side dashboard near the base of the windshield. Airbag-system components, seat-belt pretensioners, restraint-system wiring, and related collision sensors should be professionally inspected and may require replacement. According to the VIN decode, this is a 2022 BMW 540i sedan with a 3.0-liter six-cylinder gasoline engine and an eight-speed automatic transmission. The vehicle was manufactured by BMW AG in Austria. The decoded equipment includes front driver and passenger airbags, front and rear curtain airbags, front side airbags, knee airbags, ABS, electronic stability control, forward collision warning, lane-departure warning, lane-keeping assistance, blind-spot monitoring, and a standard rear-visibility system. The VIN decode does not provide a drive-type specification or additional factory options. A complete structural, mechanical, electrical, cooling-system, lighting, suspension, steering, and restraint-system inspection is recommended before purchase. The visible findings do not establish the condition of components behind the damaged front-end panels or the vehicle’s ability to operate safely.