2019 BMW 440I

The auction lists the primary damage as “Right Side.” However, the supplied Stage 1 assessment states that the visible evidence does not support this claim: the extensive damage is concentrated on the left side, while the right side appears comparatively intact in the available views. The visible damage is severe and concentrated along the vehicle’s left side. The left door outer panel is extensively creased, crushed, and scraped, with severe deformation to its lower section. A large section of the left rear quarter panel around the wheel arch is missing, exposing inner body surfaces with torn and irregular panel edges. The left rocker panel and lower side structure also show multiple pronounced folds, crushed sections, distorted metal, and open attachment points. The left front fender is missing, leaving the wheel-arch area and inner components exposed. The left rear wheel arch has torn and irregular outer edges, missing painted material, and exposed surfaces adjacent to the rear tire. The left door window glass is missing, and the door interior has exposed inner metal and components. Several long exterior trim pieces and a flexible sealing strip are detached and lying beside the vehicle. Based on the recorded findings, this vehicle should be treated as requiring extensive body and lower-side structural repairs. The condition of the rocker panel, quarter panel, wheel arches, door, mounting points, suspension, wheel alignment, airbags, and other components cannot be established from these findings alone and should be verified through a thorough physical inspection before purchase or repair. The VIN decodes as a 2019 BMW 440i Coupe with all-wheel drive, a 3.0-liter six-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle was manufactured by BMW AG in Germany. The supplied NHTSA recall records include campaign 19V352000 concerning driver and passenger knee air-bag assemblies, which may not deploy as intended if improperly folded or assembled. Campaign 18V465000 concerns a crankshaft sensor that may cause the engine to stall. The records also include campaign 18V533000 concerning a front passenger air-bag inflator, although its description identifies specific 2019 430i xDrive Gran Coupe, 440i xDrive Gran Coupe, and 430i xDrive Convertible vehicles. Recall applicability and completion should be confirmed directly against this VIN with BMW or an authorized dealer.