2017 BMW 430I

The vehicle is listed as a 2017 BMW 430i with a SALVAGE CERTIFICATE and an auction primary-damage classification of FRONT END. Stage 1 reports that the visible evidence supports the FRONT END classification, with substantial damage to the front bumper, hood, and passenger-side headlamp area. Stage 1 also states that the SALVAGE CERTIFICATE status cannot be confirmed from exterior photographs alone. The front bumper cover has severe damage on both front corners and across the lower bumper area. It is torn, displaced, and partially absent, with dark components exposed behind it. White bumper material is detached and hanging outward, particularly at the passenger-side corner. The passenger-side headlamp assembly has moderate damage, including fractured or missing outer material, irregular gaps, and displaced internal components. The hood has moderate deformation at both front corners. It shows dents and creases above the headlamps, with raised, uneven front edges and irregular gaps. These areas should be inspected for damage to the underlying mounting points, front-end structure, cooling components, lighting systems, and safety systems before repair or purchase. Inside the vehicle, the outer bolster of the front passenger seat has minor darkened abrasion and surface wear along the side seam. The VIN decode identifies this vehicle as a Germany-built 2017 BMW 430i convertible/cabriolet with a gasoline 2.0-liter four-cylinder engine. The decoded output lists 248 horsepower, rear-wheel drive information as unspecified, and transmission details as unspecified. The vehicle is equipped with standard ABS, electronic stability control, traction control, front, side, curtain, and knee airbags, as well as a standard rear-visibility system. Some driver-assistance features, including forward-collision warning, lane-departure warning, lane-keeping assistance, blind-spot monitoring, and parking assistance, are listed as optional; actual equipment should be verified on the vehicle. NHTSA records list two airbag recalls applicable to certain 2017 BMW 430i vehicles. Both concern seat-mounted side-airbag inflator initiators that may fail to ignite, preventing deployment during a crash and increasing the risk of injury. BMW’s stated remedy is replacement of the affected airbag modules free of charge. The vehicle’s recall completion status should be verified by VIN with BMW or an authorized dealer before purchase.