2017 BMW 430I

The vehicle is a 2017 BMW 430i coupe with a 2.0-liter, four-cylinder gasoline engine. NHTSA records identify BMW AG as the manufacturer, with production in Germany. The decoded specifications also indicate left-hand drive, two doors, four seats, and an 18-inch wheel size. The auction lists the vehicle as having a SALVAGE CERTIFICATE and classifies the primary damage as FRONT END. Based on the provided photo assessment, the extensive hood and front bumper damage supports the FRONT END classification. However, the SALVAGE CERTIFICATE status cannot be confirmed or disproved from exterior photographs alone. The front hood has severe deformation, including large creases, a raised and uneven leading edge, an irregular gap above the grille, and scraped paint near the front center. The front bumper cover is severely damaged, with broken and missing sections around the upper grille and the front corner on the left side of the image. Jagged plastic edges, cracking, abrasion marks, and components visible behind the bumper opening are present. The surrounding trim for the upper grille is also cracked and missing in several areas, leaving irregular openings and exposing the radiator area behind it. Inside the cabin, the steering-wheel leather shows minor surface wear, including shiny, abraded, and discolored areas. NHTSA records list two air-bag recalls applicable to certain 2017 BMW 430i vehicles: campaigns 17V115000 and 16V914000. Both concern seat-mounted side-air-bag inflator initiators that may fail to ignite, potentially preventing deployment during a crash. The listed remedy is replacement of the affected air-bag modules by a BMW dealer at no charge. Recall completion should be verified by checking this vehicle’s VIN with BMW or an authorized dealer.