2018 BMW 430I Gran Coupe

The vehicle is listed by the auction with a “CERT OF SALVAGE > 75% DAMAGE” condition designation and “SIDE” as the primary damage classification. The visible damage is concentrated on the left side, supporting the SIDE classification; however, the greater-than-75-percent damage percentage cannot be confirmed from the available findings. The left front door has severe damage, including deep dents, sharp creases, extensive deformation, and dark abrasion marks across the middle and lower sections. The rear edge of the left front fender is moderately deformed and creased around the door gap and lower side-vent area. The exterior rocker-panel/side-skirt trim is missing along this side, leaving lower mounting points and an unfinished sill edge exposed. The instrument cluster displays a “Driver restraint system” message together with red restraint-related warning indicators. This indicates that the restraint system requires diagnostic testing and repair before the vehicle is considered safe to operate. Further inspection should include the front seat belts, pretensioners, airbags, restraint control module, wiring, and related crash sensors. NHTSA records identify this vehicle as a 2018 BMW 430i Gran Coupe with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle was manufactured by BMW AG in Germany. One NHTSA safety recall is listed for this model: recall 17V507000 concerns the front seat-belt emergency locking retractors, which may fail to properly restrain an occupant in a crash. BMW’s remedy was inspection and, if necessary, replacement of the front seat-belt assemblies at no charge. Recall completion should be verified by VIN with BMW or an authorized dealer, particularly in view of the current restraint-system warning.