2018 BMW 430I Gran Coupe

The auction record lists the vehicle condition as “Certificate of Title” and identifies the primary damage as “Front End.” Stage 1 reports that the visible evidence supports the front-end damage code because extensive damage is present to the front bumper, fascia, lighting areas, and hood. The certificate-of-title status cannot be verified from the available images. The vehicle has extensive front-end collision damage. The front bumper cover, grille, and fascia are missing, exposing the radiator and other inner components, mounting hardware, wiring, and separated plastic sections. Both headlamp areas are open, with the lighting assemblies and surrounding trim absent or visibly broken. The front corners and wheel-arch areas are incomplete and damaged, particularly on the left side, with loose wiring and exposed inner components. The hood has pronounced creases, raised areas, and depressions across both front sides and corners. The rear bumper cover is also missing across the vehicle. The underlying bumper structure, mounting components, wiring, and rear corner hardware are exposed, with broken and detached plastic components visible on both sides. The left rear corner fascia below and beside the tail lamp is fractured and incomplete. The right rear quarter panel near the bumper has a broad area of gray abrasion and missing white surface finish. Additional bumper-related parts, including cover sections and underbody or fascia pieces, are detached and lying on the ground. The instrument cluster displays a “Refill coolant” message, along with an illuminated check-engine indicator and other warning indicators. This is a cooling-system concern that requires further diagnosis; the underlying cause and mechanical condition cannot be determined from the available images. The VIN decodes as a 2018 BMW 430i Gran Coupe passenger car manufactured by BMW AG in Germany. It is equipped with a 2.0-liter four-cylinder gasoline engine, an eight-speed automatic transmission, and all-wheel drive. One NHTSA safety recall is listed for this vehicle model and year: recall 17V507000, concerning the front seat-belt emergency locking retractors. An incompatible locking-mechanism housing may prevent the seat belt from properly restraining an occupant during a crash. BMW’s stated remedy is inspection and, if necessary, replacement of the front seat-belt assemblies by a dealer at no charge. Recall completion for this individual vehicle should be confirmed with BMW or an authorized dealer using the VIN.