2025 BMW 430I Gran Coupe

This 2025 BMW 430i is listed by the auction with a salvage vehicle title and “FRONT END” as the primary damage classification. The visible severe front-end damage supports the unverified front-end claim; however, the salvage-title status cannot be confirmed from photographs. The front of the vehicle has extensive collision damage. The hood is severely creased, buckled, and deformed across the front and left side, with a raised and irregular leading edge. The central grille and portions of the front bumper are missing, exposing internal components, mounting structures, and loose wiring. The front fender at the affected corner is heavily crushed and torn, and a headlamp assembly is absent. Metal panels and support sections in the front engine-bay area are sharply creased and folded. Additional lower-front components, brackets, wiring, and mounting pieces are exposed, with several parts hanging or separated from their normal positions. The front wheel is visibly angled outward relative to the body, and suspension-area components are exposed. The condition of the underlying frame, suspension, steering, cooling system, and other mechanical components requires a thorough physical inspection. Inside, the driver and front passenger airbags are visibly deployed, with additional white airbag fabric visible near the roofline. The rear bumper corner on the right side of the image is missing a section of trim or cover, leaving an open area with irregular edges. A light-colored scrape is also visible on the rear quarter panel above and forward of that bumper corner. According to the VIN decode for VIN WBA23FB07SFV14585, this is a BMW 430i from the 4-Series range, listed as a Coupe/Gran Coupe, with a 2.0-liter four-cylinder gasoline engine rated at 255 horsepower. The vehicle was manufactured by BMW AG in Germany. One NHTSA safety recall is listed for this model and year: recall 25V202000 concerns a possible loose electrical connection between the starter-generator and battery. The condition may cause an engine stall or overheating of the wiring, increasing the risk of a crash or fire. BMW’s stated remedy is to inspect and replace the starter-generator and positive battery cable as necessary, free of charge. Recall completion should be verified with BMW using the VIN.