2018 BMW 340 SA

The auction record identifies this vehicle as a 2018 BMW 340i with a salvage vehicle title and FRONT END as the primary damage classification. Stage 1 reports that the visible evidence supports the stated FRONT END primary-damage claim. The salvage-title status cannot be confirmed from photographs. The vehicle has extensive front-end collision damage. The front bumper cover, headlights, grille, and adjacent fascia components are missing, leaving radiator-area components, wiring, brackets, and other internal parts exposed. Loose wiring and detached plastic pieces are visible below the front end. Lower front support and bracket components appear bent or displaced on both sides. The hood has multiple creases and areas of deformation across its front edge and center-left section. Both the left and right front hood edges are visibly deformed and do not align continuously with the exposed front corners. The left front fender and wheel-arch trim are also missing, exposing the wheel-side and inner front-end components. The instrument cluster displays check-engine, brake/ABS, steering, restraint, tire-pressure, and other warning indicators. The cause of these warnings cannot be determined from the available findings. According to the VIN decode, this is a 2018 BMW 340i sedan equipped with a 3.0-liter six-cylinder gasoline engine and an eight-speed automatic transmission. The decoded engine output is listed as 320 horsepower, and the vehicle was manufactured by BMW AG in South Africa. A complete inspection should be performed before purchase, including assessment of the front structure, cooling system, wiring, steering and braking systems, restraint systems, mechanical operation, and the cause of the illuminated warning indicators.