2013 BMW 335 xDrive SA

The auction record identifies the vehicle as having a salvage title and lists “FRONT END” as the primary damage. Stage 1 reports that the visible evidence supports the stated front-end damage claim; however, the salvage-title status cannot be independently confirmed from photographs. The vehicle has severe collision damage across the entire front end. The front bumper cover, grille, headlights, and much of the surrounding fascia are missing or extensively damaged, exposing the engine bay, radiator components, wiring, brackets, and engine accessories. The hood is severely folded with multiple deep creases and collapsed sections. The front structure is visibly deformed. The radiator support and upper front members are crushed, folded, and displaced, and the right-front engine-bay perimeter also shows extensive deformation. The front-left corner is heavily crushed, with damage extending through the fender, the base of the A-pillar, the front-door edge, and the rocker area. The lower side skirt or rocker-cover area is absent or displaced, and the surrounding panel gaps are irregular. A wheel and tire with attached suspension or steering components, along with other loose parts and wiring, are visible on the floor; their original mounting locations cannot be confirmed from the available findings. The driver’s steering-wheel airbag is deployed. An NHTSA recall is listed for this vehicle involving the driver frontal airbag inflator, which may rupture during deployment and release metal fragments. The recall remedy involves replacement of the driver airbag module or inflator by BMW. The available information does not establish whether the recall repair was completed. VIN decoding identifies this vehicle as a 2013 BMW 335i xDrive sedan, manufactured by BMW AG in South Africa. It is specified with a 3.0-liter six-cylinder gasoline engine and all-wheel drive. Given the extensive structural, body, restraint-system, and missing-component damage, a complete physical inspection and comprehensive assessment of the drivetrain, cooling system, wiring, suspension, steering, and safety systems would be required before determining its repairability or total repair cost.