2013 BMW 335 HP

The auction record identifies this vehicle as having a salvage title certificate with “REAR END” listed as the primary damage. Stage 1 reports that the visible rear-end damage supports the stated rear-end damage code; however, the salvage-title status cannot be confirmed from photographs. The main damage is concentrated at the rear corner. The rear quarter panel has severe denting, creasing, and deformation around the wheel arch and tail-lamp opening, with pronounced waviness and scraping on adjacent surfaces. The rear bumper cover is broadly deformed and heavily abraded, with a significant gap and separation from the body at the visible corner. The visible tail-lamp assembly is missing, leaving the lamp cavity and internal mounting components or wiring exposed. The right rear tail-lamp area as viewed is specifically identified as missing. Inside, the visible outer lower bolster of a front leather seat has localized scuffing and minor abrasion. The VIN decodes as a 2013 BMW 335is, 3-Series convertible, manufactured by BMW AG in Germany. It is listed with a 3.0-liter, six-cylinder gasoline engine and a decoded output of 320 horsepower. The supplied data does not specify the drivetrain or transmission. One NHTSA safety recall is listed for this vehicle configuration: recall 16V071000 concerns the driver’s frontal air-bag inflator, which may rupture during deployment and project metal fragments. BMW’s stated remedy is replacement of the driver’s frontal air-bag module or inflator, free of charge. Recall completion should be verified with BMW using the VIN before purchase or operation. The visible evidence indicates substantial rear-end body and lighting damage. A physical inspection is recommended to assess hidden structural, suspension, exhaust, electrical, air-bag, and mechanical damage, as well as the quality and extent of any previous repairs.