2025 BMW 330I XDRIVE

The vehicle is listed with “Left Rear” as the auction’s primary-damage classification. The visible evidence supports this classification: substantial damage is present at the left rear quarter panel, bumper, and outer tail lamp. The left rear quarter panel is severely crushed and deformed around the wheel arch and rear lamp area. The left side of the rear bumper cover is severely torn, displaced, and separated from the body, with components exposed behind it. Additional scuffing, torn edges, and a displaced lower-corner section are visible. The left outer tail lamp has a missing or broken lens section, exposed internal elements, and a circuit board hanging outside the lamp housing. A wide, irregular gap is also visible between the left edge of the trunk lid and the adjacent quarter-panel area. The VIN identifies this vehicle as a 2025 BMW 330i xDrive sedan with all-wheel drive, a 2.0-liter four-cylinder gasoline engine rated at 255 horsepower, and a vehicle build location in San Luis Potosí, Mexico. Factory safety equipment decoded by NHTSA includes front, side, curtain, and knee airbags, electronic stability control, forward-collision warning, pedestrian automatic emergency braking, rear automatic emergency braking, and a rear visibility system. Some driver-assistance features, including adaptive cruise control, blind-spot monitoring, lane-departure warning, and parking assistance, are listed as optional. One NHTSA safety recall is listed for this vehicle model and year: campaign 25V202000, involving a possible loose electrical connection between the starter-generator and battery. The condition may cause an engine stall and may overheat the wiring, creating a fire risk. BMW’s stated remedy is inspection and replacement of the starter-generator and positive battery cable as necessary, free of charge. Recall remedy completion should be verified with BMW before purchase. Because the visible damage is concentrated at the left rear and includes deformation around the quarter panel, lamp, bumper, and trunk opening, a complete physical inspection is recommended to assess alignment, concealed body or mounting damage, lighting operation, electrical systems, and overall repair quality.