2024 BMW 330I

The auction lists the primary damage as “Right Side,” an unverified auction classification. Stage 1 reports that the visible evidence supports this designation: extensive collision damage is visible on the right-side doors, along with a deployed right-side curtain airbag. The right rear door has severe damage, including a large, deeply crushed outer panel with multiple sharp creases and folded metal extending from the front portion into the lower section. Extensive deformation is also visible across the mid and lower areas of the door, particularly near the front edge and lower door area. The right front door has moderate damage along its trailing edge, including denting, sharp creasing near the door gap, and multiple dark scrape and paint-transfer marks. The right-side curtain airbag is visibly deployed. White airbag fabric is hanging along the upper roof and window opening, including the right rear door opening and roofline. The findings do not establish the condition of any concealed structural, mechanical, electrical, or restraint-system components beyond the visible airbag deployment. According to the VIN decode, this is a 2024 BMW 330i sedan with a 2.0-litre, four-cylinder gasoline engine, manufactured by BMW AG in San Luis Potosi, Mexico. The decoded equipment includes curtain airbags for the first and second rows, front and knee airbags, standard ABS, electronic stability control, traction control, forward collision warning, and rear automatic emergency braking. NHTSA recall records provided for this model include recall 23V770000 concerning a steering gear that may not have been tightened properly, potentially allowing it to loosen and cause loss of vehicle control. Two additional starter-assembly recalls are listed: 26V056000, concerning possible starter overheating and fire risk, and 26V438000, an expansion of that recall. Recall applicability and completion should be verified by VIN with BMW or NHTSA before purchase.