2021 BMW 330I

The auction record lists the vehicle as having a **Certificate of Destruction** title and identifies **front-end damage** as the primary damage. Stage 1 reports that the visible front-end collision damage supports the FRONT END classification; however, the photographs alone cannot confirm the Certificate of Destruction title. The 2021 BMW 330i is identified by the VIN decode as a four-door sedan with a 1.997-liter four-cylinder gasoline engine, 255 hp, and an eight-speed automatic transmission. It was manufactured by BMW AG in Mexico. The front of the vehicle has severe collision damage. The front bumper cover, grille, lower fascia, and other front-end coverings are missing or broken, exposing the reinforcement, radiator area, wiring, brackets, and internal mounting components. The detached blue bumper cover is torn, deeply creased, and fractured, with broken grille and trim sections. One headlamp is missing from its mounting area, while the opposite headlamp is shattered with internal components exposed. The hood has a bent and uneven front edge, deformation at the damaged-side corner, and large irregular gaps above the exposed front-end components. The front fender at the damaged-side corner is missing, exposing the inner fender and mounting structure. The front door-side mirror is broken and displaced, with its mounting area and internal components exposed. The visible door outer panel has scratches, scuffing, and a localized crease. Additional light white scuff marks are visible on the side door panels. The extent of the visible damage indicates that substantial front-end repair and component replacement will be required. The condition of hidden structural, cooling, electrical, restraint, suspension, steering, and mechanical components cannot be established from these findings. The vehicle should not be considered roadworthy without a comprehensive physical inspection and completion of all required repairs. NHTSA records provided for this 2021 BMW 330i list recalls concerning the passenger-seat-belt automatic locking retractor (21V554000), rearview-camera software (21V096000), front seat-belt buckle attachment (21V298000), seat-frame welding (23V211000), seat-belt warning software (23V584000), and the engine starter assembly or relay, which may overheat and create a fire risk (25V636000 and 26V056000). Recall completion should be verified by VIN with BMW or NHTSA before purchase. Until the starter-related remedies are confirmed, the applicable parking guidance and other manufacturer recall instructions should be followed.