2024 BMW 330E

The vehicle is a 2024 BMW 330e sedan, VIN 3MW39FF04R8E41465. Factory data identifies it as a plug-in hybrid with a 2.0-litre four-cylinder engine, 288 hp, and electric and gasoline power sources. It was manufactured by BMW AG in San Luis Potosí, Mexico. The auction lists the vehicle with a SALVAGE CERTIFICATE and identifies FRONT END as the primary damage. The visible missing and damaged front-end components support the stated FRONT END damage code. However, the SALVAGE CERTIFICATE status cannot be confirmed from exterior photographs. The front end has extensive collision damage. The bumper cover, outer front fascia, centre grille, and both headlamp assemblies are missing, leaving the radiator, intercooler, mounting brackets, wiring, and other internal components exposed. The hood has pronounced crushed creases along the front-left and centre-front edge, with scraped areas and blue paint transfer visible on the deformed section. The front-left fender is also absent, exposing the inner wheel-arch area, body mounting structure, and wiring. Detached painted body panels, bumper-related trim, liner material, and other front-end parts are lying on the ground in front of the vehicle. The exterior side-sill trim is missing along the lower left rocker-panel area. The instrument display shows “Drive carefully. Fault.” together with an illuminated warning indicator, indicating that additional diagnostic work is required. The visible damage is severe and extends beyond cosmetic components. The cooling system, lighting, wiring, structural mounting areas, restraint and driver-assistance systems, and plug-in hybrid systems should be professionally inspected before repair or operation. The vehicle should not be driven until its safety and mechanical condition have been verified.