2016 BMW 328I XDRIVE

The auction lists the primary damage as “Front End.” However, Stage 1’s photo review states that the visible evidence does not show clear frontal impact damage to the bumper, grille, headlights, or front structure. It identifies significant damage concentrated on the left front fender and left front door, concluding that the “Front End” primary-damage claim is not fully supported and appears mismatched. The left front fender has severe inward deformation, with multiple sharp creases extending from the wheel-arch area toward the side mirror and door opening. The left front door outer panel is also severely deformed, with deep creases and distorted contours across the upper and middle sections. Light-colored surface scuffing is visible on the left exterior mirror housing. No other damage or mechanical findings are provided. The extent of the deformation means the fender and door will require detailed bodywork assessment, and the adjacent door opening, hinges, mirror mounting area, wheel-arch area, and related structural components should be inspected for hidden damage before repair estimates are finalized. According to the VIN decode, this is a 2016 BMW 328i xDrive sedan with all-wheel drive, a 2.0-liter four-cylinder gasoline engine rated at 241 horsepower. The vehicle was manufactured by BMW AG in South Africa. One NHTSA safety recall is listed for this make, model, and year: campaign 24V608000, concerning the engine cooling-system water-pump electrical connector. An improperly sealed connector may be exposed to water and short circuit, increasing the risk of fire. BMW’s stated remedy is inspection and replacement of the water pump and connector as necessary, together with installation of a protective shield, at no charge. Recall completion should be verified with BMW or an authorized dealer using the VIN.