2013 BMW 328I XDRIVE

The auction record lists the vehicle as having a “Clear” title with “Normal Wear & Tear” as the primary damage classification. However, Stage 1 reports that the visible evidence contradicts both claims: the vehicle shows extensive front-end collision damage, including a deformed hood, missing front fascia and headlamps, damaged radiator fins, and missing rear lamp assemblies. The front bumper cover, grille, and both headlamp assemblies are absent, leaving the radiator, heat exchangers, support structures, mounting brackets, wiring, and other engine-bay components exposed. The radiator and heat-exchanger fins are extensively bent and crushed across the visible front surface. Wiring and connectors are hanging loose in the front right engine-bay area. The hood has substantial creasing and deformation across its front edge and both corners, with irregular gaps above the exposed front-end components. Both exterior mirror housings also have exposed internal components; the outer covers and reflective glass are not visible. Both rear taillight assemblies are missing. The open lamp cavities contain exposed internal components and wiring, and clear plastic or tape has been placed over the openings in at least one view. The full extent of damage behind the visible areas cannot be determined from these findings. The vehicle should not be considered road-ready without a complete structural, cooling-system, electrical, lighting, restraint-system, and mechanical inspection, followed by appropriate repairs and testing. The instrument cluster displays BRAKE, check-engine, seat-belt, airbag, and vehicle warning indicators, as well as a Door open message. These warnings may be related to the damage or unresolved system faults, but their specific causes are not established by the available findings. VIN decoding identifies a 2013 BMW 328i sedan manufactured by BMW AG in Germany. It is listed with a 2.0-liter, four-cylinder gasoline engine and a stated output of 240 horsepower. Drive type and transmission details were not provided by the decoder. NHTSA records list several recalls associated with this model and model year, including recalls involving the driver frontal air-bag inflator, brake vacuum assistance, exterior lighting software, and the engine cooling-system water-pump electrical connector. Recall completion status for this specific vehicle should be confirmed by checking the VIN with BMW or an authorized dealer before purchase.