2013 BMW 328I xDrive SA

The auction record lists the vehicle as having a Clear condition and identifies the primary damage as Front End. Stage 1 reports that the Front End claim is supported by the visible evidence, including extensive front-end deformation, broken bumper components, a missing left-front headlamp, and damage to the left-front fender. Stage 1 also states that the Clear condition cannot be verified from photographs and that the visible damage is inconsistent with an undamaged-vehicle interpretation. The vehicle is a 2013 BMW 328i xDrive sedan, identified by VIN WBA3B3G51DNP38342. Factory data lists a 2.0-liter, four-cylinder gasoline engine, all-wheel drive, and an assembly plant in South Africa. The most significant damage is concentrated at the left front. The hood is severely creased and deformed at the left-front corner, with its front edge raised above the damaged headlamp and fender area. The left-front fender is crushed and creased around the wheel opening. The front bumper cover and lower fascia are cracked, torn, displaced, and partly missing, leaving large openings and internal components exposed. The fascia and trim near the left side of the grille and bumper junction are broken and separated, with jagged edges. The left-front headlamp assembly is missing. Additional body damage is present at the right-rear quarter panel, which has a moderate dent, scraping, paint loss, and exposed lighter-colored material above and behind the wheel. Minor scuffing is visible on the right-rear door, lower side panel, and rear bumper cover. The instrument cluster displays “Restraint system” along with red occupant/restraint warning icons. The condition of the airbags, pretensioners, sensors, wiring, and other safety-system components should be confirmed through a complete diagnostic scan and physical inspection before purchase or road use. NHTSA records list several recalls applicable to this model and model year. Campaigns 13V454000 and 14V627000 concern the brake vacuum pump and power-assist system; 20V017000 concerns the driver frontal air-bag inflator; 15V520000 concerns front side-marker-light operation; and 24V608000 concerns the electrical connector and protective components for the engine water pump. Recall completion should be verified by VIN with BMW or an authorized dealer, and any outstanding repairs should be completed. The photographs document substantial collision damage, particularly to the front-left structure and exterior components. The available findings do not establish the condition of the underlying frame, suspension, steering, cooling system, engine, transmission, electrical systems, or drivetrain. A qualified repair facility should inspect the vehicle on a lift, check alignment and structural measurements, scan all control modules, and test the restraint, lighting, braking, cooling, and all-wheel-drive systems before its condition or repair cost is assessed.