2015 BMW 328I

The auction records list the primary damage as “Front & Rear.” The photo-based assessment supports visible exterior damage at both ends, but describes the condition as predominantly surface scuffing, paint loss, and finish deterioration. No clear major front or rear structural deformation is visible in the provided photos. The vehicle has extensive exterior finish deterioration. The black/dark finish is peeling in large, irregular areas on the trunk lid, rear deck edge, left rear door, left rear quarter panel, both right-side doors, and portions of the left-side doors. The hood and left front fender have widespread faded, cloudy, and streaked discoloration. Brownish streaking and fading are also present on the right rear quarter panel and fuel-filler door. These conditions appear to require substantial refinishing or repainting rather than localized touch-up work. The rear bumper cover has multiple dark scuffs, abrasion streaks, and areas of paint loss. At the front, both lower bumper corners show scraping and localized paint loss. The right front bumper corner and lower edge have additional abrasion damage, and the near-side lower bumper edge has an irregular damaged section with a visible gap. The left headlamp lens appears moderately cloudy compared with a clear lens. The findings are primarily cosmetic, although the bumper damage should be physically inspected to confirm the condition of the cover, mounting points, and any components behind it. The VIN decodes this vehicle as a 2015 BMW 328i four-door sedan manufactured by BMW AG in Munich, Germany. It has a 2.0-liter, four-cylinder gasoline engine; the decoded data lists 241 horsepower. Drive type and transmission details were not provided. NHTSA records identify four recalls associated with this model and year: campaign 15V520000 for front side-marker-light software, campaign 24V288000 for the head-air-bag inflators, campaign 24V527000 for the driver frontal air-bag inflator, and campaign 24V608000 for the electric water-pump connector and protective shielding. The remedies involve software correction, air-bag replacement, and inspection or replacement of the water pump and connector as applicable. Recall completion and VIN-specific eligibility should be confirmed with BMW or an authorized dealer before purchase.