2013 BMW 328 xDrive

The vehicle is listed by the auction as “PERMIT NO BRAND - UNFIT,” with “FRONT END” recorded as the primary damage. Stage 1 reports that the visible missing and damaged front-end components support the FRONT END classification. The permit/no-brand and unfit title status could not be independently verified from the photographs. The front bumper cover is missing, exposing the bumper reinforcement, radiator area, and lower front components. Both central kidney grille inserts are also absent. The left front bumper corner has detached and broken plastic, leaving the bumper-side area open. The exposed silver bumper reinforcement shows visible deformation across its central section. Multiple lower front fascia, air-intake, and support components are broken, detached, or missing, with loose pieces visible below the reinforcement. The upper and lower radiator-support areas also contain broken or missing plastic panels, open mounting areas, and exposed lower cooling components. A detailed physical inspection is recommended to determine whether any concealed cooling-system, structural, mounting, lighting, sensor, or mechanical components were affected. VIN decoding identifies this vehicle as a 2013 BMW 328i xDrive sedan with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, manufactured by BMW AG in Germany. One NHTSA safety recall is listed for this vehicle model and year: campaign 16V071000, concerning the driver’s frontal air-bag inflator. The inflator may rupture during deployment, potentially causing serious injury. BMW’s stated remedy is replacement of the driver’s frontal air-bag module or inflator, depending on the vehicle. Recall completion should be confirmed with BMW using the vehicle identification number before purchase.