2012 BMW 328

The auction record lists a salvage certificate of title and “FRONT END” as the primary damage classification. This is an unverified auction designation. Stage 1’s photo-based verdict is that the visible evidence supports the stated front-end damage claim, with substantial damage to the front bumper, headlamp, hood edge, and front fender areas. The front bumper cover is severely damaged on both sides, with extensive cracking, tearing, and missing sections around the corners and lower grille opening. The vehicle-left headlamp assembly is severely broken, with missing lens and surrounding material and exposed internal components. Both front fenders are moderately deformed and scraped around the wheel arches and headlamp areas; the vehicle-left side also has an irregular opening exposing the inner wheel-arch area. The vehicle-left front wheel-arch liner or adjacent plastic shielding is missing. The front edge of the hood is moderately deformed, raised, creased, and uneven, with irregular gaps above the grille and headlamp areas. Minor cosmetic scuffs are visible on the left rear quarter panel near and above the rear bumper. The steering-wheel rim also shows minor discoloration and surface wear, particularly along the upper and left portions. The supplied VIN decode identifies the vehicle as a 2012 BMW 328i four-door sedan, manufactured by BMW AG in Munich, Germany. It has a gasoline 2.0-liter four-cylinder engine and a listed output of 241 horsepower. The supplied data does not identify the drivetrain or transmission. One BMW frontal driver air-bag inflator recall record is provided. The stated risk is that excessive internal pressure could cause the inflator to rupture during deployment, and the listed remedy is replacement of the driver’s frontal air-bag module or inflator at no cost. Because the applicability ranges in the supplied recall description vary by body style and model year, recall completion and applicability should be confirmed directly by VIN with BMW or an authorized dealer. A physical inspection is recommended to assess concealed structural, suspension, lighting, air-bag, cooling-system, and mechanical damage before purchase or repair.