2013 BMW 328

The auction record identifies the vehicle as having a salvage title with “REAR END” listed as the primary damage. Stage 1 reports that the visible extensive rear bumper and trunk-area damage supports the “REAR END” classification; however, the salvage-title status cannot be confirmed from the provided photos. The rear bumper cover has severe damage across most of its width, including extensive cracking, tearing, deep splits, scraped and missing surface material, exposed dark substrate, and separation along the upper edge below the trunk lid. The trunk lid has a prominent vertical crack-like line extending downward from the BMW emblem area toward the license-plate recess. Its lower edge appears uneven above the damaged bumper. These findings indicate that the rear body and bumper assembly will require thorough inspection and repair or replacement. The photos do not establish the condition of internal reinforcements, rear body structure, lighting, sensors, trunk operation, or other components behind the visible damage. Inside the cabin, the front driver’s seat cushion has a minor horizontal upholstery tear with lighter underlying material visible. VIN decoding identifies this vehicle as a 2013 BMW 328i four-door sedan, manufactured by BMW AG in Munich, Germany. It is equipped with a 2.0-liter, four-cylinder gasoline engine; the decoded output is 240 horsepower. Drive type and transmission details were not provided. One NHTSA safety recall is listed for the driver frontal air-bag inflator module. The recall concerns the possibility of excessive internal pressure causing the inflator to rupture during deployment, potentially releasing metal fragments. BMW’s stated remedy is replacement of the driver’s frontal air-bag module or inflator at no charge. The recall repair history should be verified with BMW or an authorized dealer using the VIN before purchase.