2016 BMW 328 SA

The vehicle is listed as a salvage-title vehicle with “FRONT END” recorded as the auction’s primary damage classification. The visible damage clearly supports the stated front-end classification. However, the salvage-title status cannot be confirmed from exterior and interior photographs alone. The front end has extensive collision damage. The hood is severely crumpled, with multiple sharp creases, deep depressions, folded metal, and substantial deformation along the leading edge. The front bumper cover and lower fascia are severely cracked, torn, displaced, and separated, with large openings exposing components behind the fascia. The kidney-grille area has broken and displaced trim with open gaps. Both headlamp assemblies show severe displacement and damage, including visible gaps around the right-side unit. Both front fenders are moderately deformed near the headlamp and wheel-arch areas. The driver and front-passenger airbags are deployed, with additional deployed material visible near the lower driver-side dashboard. This indicates that the restraint system will require thorough inspection and repair. Minor cosmetic damage is also visible elsewhere. Light scuffing and surface marks affect the right rear door, rear quarter panel, rear bumper, left rear bumper, and adjacent lower rear body. The left front and rear doors have light horizontal scuffing and localized shallow surface irregularities. According to the VIN decode, this is a 2016 BMW 328i sedan with a 2.0-liter four-cylinder gasoline engine. The vehicle was manufactured by BMW AG at the Rosslyn plant in South Africa. The decoded safety equipment includes front, side, curtain, and knee airbags, as well as driver and front-passenger seat-belt pretensioners. The findings do not establish the condition of the engine, transmission, suspension, steering, cooling system, frame or unibody structure, wiring, or other components behind the damaged front fascia. A comprehensive physical inspection and diagnostic assessment are recommended before purchase, including verification of structural alignment, airbag-system repairs, headlamp and bumper support components, and vehicle title documentation.