2016 BMW 320I SA

The vehicle is a 2016 BMW 320i sedan, equipped with a 2.0-litre four-cylinder gasoline engine. NHTSA VIN data identifies BMW AG as the manufacturer and South Africa as the assembly country. The auction lists the primary damage as “Right Front.” Stage 1 reports that the visible damage supports this claim, with the most extensive breakage concentrated around the right-front bumper, fender, grille, and headlamp area. Stage 1 also notes additional damage across the remainder of the front fascia. The front bumper is severely damaged across its width, with extensive cracking, tearing, scraped paint, separated edges, and missing lower sections. The right-front corner has a large opening that exposes dark internal components, and the bumper-to-fender junction is broken open with separated panel edges. The right-front fender has creases, paint scraping, and an irregular lower-front edge. The hood’s right-front edge and corner are uneven and scraped above the headlamp and grille area. The kidney grille surround and lower grille or air-intake area have broken or missing trim and irregular openings. The right-front headlamp area also has open gaps and exposed dark housing; the findings do not confirm the operating condition of the headlamp or any components behind the damaged fascia. The left-front bumper corner has additional scraping, cracking, and lower-edge separation. A minor dark scuff is visible on the lower side sill near the front door. No known failure-pattern flags were provided. The findings are limited to the listed visible damage and do not establish the condition of the vehicle’s mechanical, structural, electrical, safety, or restraint systems. Thorough physical inspection and functional testing are recommended before purchase.