2014 BMW 320I SA

The auction lists the primary damage as “Front End.” Stage 1 reports that the visible evidence supports this classification, with substantial damage to the hood, front bumper cover, grille surrounds, and adjacent front fascia. The hood is severely buckled and raised across the front and center sections, with wide, uneven gaps above the fenders, headlamps, and front fascia. The front bumper cover is severely cracked, displaced, and separated at both corners, with open sections and broken edges. Both kidney-grille surrounds have broken lower sections, while large gaps are visible between the bumper, grille surrounds, and headlamp assemblies. The headlamp assembly remains present in the documented front-corner view, although the surrounding interface is separated and damaged. The extent of any underlying structural, cooling-system, lighting, restraint-system, or mechanical damage cannot be determined from these findings and should be checked by a qualified technician. Light scuffs and small abrasions are also reported on the left-side doors and lower rocker trim. The VIN decodes as a 2014 BMW 320i sedan manufactured by BMW AG in Germany. It has a 2.0-liter, four-cylinder gasoline engine and a reported output of 181 horsepower. Drive type and transmission details were not provided. The supplied NHTSA recall records list several campaigns applicable to 2014 BMW 320i vehicles, including recalls involving exterior-lighting software, the brake-vacuum pump, the fuel pump, and side/head air-bag inflators. A further campaign concerns the driver frontal air-bag inflator. Recall completion for this specific vehicle should be verified with BMW or an authorized dealer using the VIN before purchase or operation.