2014 BMW 320I SA

The auction lists the primary damage as “Front & Rear.” However, the Stage 1 assessment states that the visible evidence supports rear collision damage, while no clear front collision damage is visible in the exterior photographs; therefore, the “Front & Rear” classification is only partially supported. The documented damage is concentrated at the rear. The right half of the trunk lid has a broad, moderate dent and crease, with deformation continuing along the lower edge near the right rear corner. The rear bumper cover has severe crushing and tearing across the center-right section and right corner. A large portion of the cover is missing, leaving an opening that exposes components behind it, with an irregular gap at the right rear corner. The available findings do not document any specific front-end damage. The vehicle is identified by VIN WBA3B1C51EPV79886 as a 2014 BMW 320i sedan manufactured by BMW AG in Germany. Factory data identifies a 2.0-liter, four-cylinder gasoline engine; drivetrain and transmission details were not provided. NHTSA records list several safety recalls applicable to this model and year, including recalls involving the front side-marker-light software, brake vacuum-pump operation, the fuel pump, head-airbag inflators, and the driver-front-airbag inflator. Recall campaigns 13V454000 and 14V627000 both concern the brake vacuum pump. The listed remedies were provided free of charge, but completion status for this vehicle is not included. The recall history should therefore be checked by VIN with BMW or an authorized dealer before purchase.