2016 BMW 320 xDrive SA

The vehicle is listed with a salvage certificate of title, and the auction identifies the primary damage as “FRONT END.” Stage 1 reports that the visible severe front-end damage supports this damage code; however, the salvage certificate of title cannot be confirmed from exterior photographs. The most significant damage is concentrated at the left front corner. The hood has multiple deep dents and sharp creases, with its front edge raised and an uneven gap above the grille and headlamp area. The left front bumper cover is cracked, torn, separated from the vehicle, and displaced outward and downward. The left front fender is crushed and sharply creased around the headlamp and wheel arch. The left headlamp assembly is broken and displaced, with surrounding trim fractured and internal components exposed. The left kidney-grille surround and adjacent fascia are cracked and broken, with irregular missing sections around the grille opening. The lower grille and bumper trim are also displaced, with separated sections and an uneven opening along the lower front edge. The bumper, hood, and fender interfaces do not align evenly, and multiple open gaps and separated panel edges are visible. Inside the vehicle, light scuffing and creasing are present on the outer bolster of the front driver’s seat. The VIN identifies this vehicle as a 2016 BMW 320i xDrive sedan with all-wheel drive, a 2.0-litre four-cylinder gasoline engine, and an indicated output of 181 horsepower. It was manufactured by BMW AG in South Africa. The vehicle is equipped with front, side, curtain, and knee airbags, as well as driver and front-passenger seat-belt pretensioners. The visible damage is severe and primarily affects the front body structure and components. The condition of concealed mechanical, structural, electrical, restraint, cooling, and suspension components cannot be determined from the supplied findings and should be verified through a thorough physical inspection before purchase.