2017 BMW 320 xDrive SA

The auction record lists this vehicle as having a public salvage title, with “REAR END” identified as the primary damage. The photo-based review reports that the visible rear-end damage supports the stated rear-end classification, including the crushed rear bumper, missing tail-lamp assembly, and deformed rear body panels. The salvage-title status itself cannot be confirmed from photographs alone. The most significant damage is concentrated at the rear corner. The outer rear tail-lamp assembly is missing, leaving the lamp cavity and internal components exposed. The surrounding rear-corner sheet metal and adjacent quarter panel are severely creased and deformed around the lamp opening and wheel-arch area. The rear bumper cover is deeply crushed and torn across the rear corner and lower section, with displaced, irregular edges. The outer trunk-lid corner and adjoining rear body area are also deformed, with uneven panel gaps. The front bumper lower fascia has multiple scuff marks and abrasions, together with an uneven opening and separation along the lower center section. No additional known failure-pattern concerns were provided. VIN decoding identifies the vehicle as a 2017 BMW 320i xDrive sedan with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and left-hand drive. It was manufactured by BMW AG in South Africa. The VIN decode lists standard ABS, electronic stability control, traction control, curtain airbags for the first and second rows, and a standard rear-visibility system. Recall status was not checked. The extent of any underlying structural, lighting, electrical, or mechanical damage requires physical inspection and testing before purchase.