2017 BMW 320

The auction record lists the vehicle as having a salvage certificate, with “REAR END” recorded as the primary damage. Stage 1 reports that the visible extensive rear-end damage supports the stated rear-end classification; however, the salvage-certificate status cannot be confirmed from photos. The vehicle is a 2017 BMW 320i sedan, built by BMW AG in Germany. VIN decoding identifies a 2.0-litre, four-cylinder gasoline engine, with a listed output of 180 hp. The vehicle is left-hand drive and has seating for five. The rear of the vehicle has extensive collision damage. The trunk lid is heavily crushed and folded, with multiple deep creases and an irregular lower edge. Both rear quarter-panel and trunk-corner areas are visibly distorted, including deep creases around the left rear wheel arch and sharp crushing on the right side. The rear bumper is severely deformed, torn, and separated from the surrounding body panels on both corners. The right rear tail lamp is broken, with exposed internal components and missing portions of the assembly. The rear windshield is extensively shattered, and broken glass fragments are visible in the windshield opening and scattered across the rear seat cushion. The hood also has moderate deformation, including a raised, uneven edge and a wide irregular gap along the front fender and headlamp area. The visible findings indicate substantial body and glass damage, particularly at the rear. The condition of structural components, the trunk floor, suspension, electrical systems, safety systems, and mechanical components cannot be determined from these findings and should be checked through a comprehensive physical inspection before purchase.