2016 BMW 320

The auction record lists a Salvage Certificate of Title and identifies FRONT END as the primary damage. Stage 1 reports that the visible missing and damaged front-end components support the stated FRONT END damage code. The salvage-certificate title status cannot be confirmed from the photos. The vehicle is identified by the VIN as a 2016 BMW 320i sedan, manufactured by BMW AG in Germany. It has a 2.0-liter, four-cylinder gasoline engine. The VIN data also lists front, side, curtain, and knee airbags, along with driver and front-passenger seat-belt pretensioners; the condition and functionality of these safety systems are not established by the provided findings. The front end has extensive collision damage. The front bumper cover, grille, and lower fascia are missing, exposing the cooling modules, mounting brackets, wiring, and other front-end components. Both headlamp assemblies are absent, leaving open cavities and exposed mounting hardware. The hood is creased and deformed along its front edge, particularly at the left front corner. Both the left and right front fender panels are missing, exposing internal components around the front wheel areas. Detached BMW bumper and trim pieces are shown on the ground. These parts have visible cracking, separated sections, and broken mounting areas. The provided findings do not establish the condition of components behind the visible damage, including the cooling system, wiring, structural members, suspension, steering, restraint systems, or mechanical systems. A comprehensive physical inspection and diagnostic assessment would be required before repair or purchase decisions. Inside the vehicle, the light-colored upholstery on the lower cushion of the front passenger seat has a visible split or tear.