2018 BMW 320 SA

The vehicle is listed with a salvage vehicle title, and the auction’s primary damage classification is “REAR END.” Stage 1 reports that the visible severe rear-end collision damage supports this classification; however, the salvage-title status cannot be verified from the photos. The 2018 BMW 320i is a four-door sedan equipped with a 2.0-liter four-cylinder gasoline engine and an eight-speed automatic transmission. The VIN decoder identifies BMW AG as the manufacturer and Rosslyn, South Africa, as the assembly location. The rear of the vehicle has severe collision damage. The rear bumper cover is missing from its installed position, exposing lower rear components, mounting areas, wiring, and the heat shield. The lower rear body and trunk-closure area are visibly deformed, with an irregular lower edge and large gaps around the exposed bumper area. Bumper components and mounting structures at both rear corners appear displaced or broken, with exposed brackets and loose wiring. The rear-left quarter panel and wheel-arch area show extensive crushing, sharp deformation, torn edges, and open gaps. The rear-left body corner and trunk-side area are also crushed and torn, with displaced sheet metal and exposed internal structures. The rear-left bumper cover and adjacent trim are missing, and the rear-left tail-lamp assembly is absent, leaving an open lamp cavity with internal components visible. The detached rear bumper cover has multiple breaks, torn plastic sections, separated edges, and distorted mounting areas. The visible damage indicates that substantial rear-end body, bumper, lighting, and mounting repairs will be required. Hidden damage to internal structures, wiring, sensors, and related components cannot be determined from the provided findings and should be assessed through a comprehensive physical inspection.