2017 BMW 320 SA

The auction record lists the vehicle as “CERT OF TITLE-SALVAGE” with “FRONT END” as the primary damage classification. Stage 1 reports that the visible front-end damage supports the stated primary-damage claim; however, salvage-title status cannot be confirmed from exterior photographs. The vehicle has severe damage to the front bumper and lower front fascia. The bumper cover is extensively broken and torn, with large sections of the lower bumper and air-dam area missing. Broken plastic components are hanging below the front end, and components behind the bumper are exposed. Moderate deformation is visible at the front corner of the hood and on the front fender near the headlamp. The hood edge is irregular, with an uneven gap to the adjacent panels. The fender is crushed and folded above and behind the front wheel, with distorted edges around the headlamp and hood. The headlamp assembly is displaced, and surrounding trim is broken or missing. The lower rear bumper has minor surface scuffing, particularly toward the right side. The extent of any underlying structural, mechanical, electrical, or lighting-system damage is not established by these findings and should be verified through a comprehensive physical inspection before purchase or repair. According to the VIN decode, this is a 2017 BMW 320i four-door sedan with a gasoline 2.0-liter four-cylinder engine, manufactured by BMW AG in South Africa. The decoded equipment includes standard ABS, electronic stability control, traction control, curtain airbags for the first and second rows, front and side airbags, knee airbags, direct tire-pressure monitoring, rear visibility, and keyless ignition. Some driver-assistance features, including lane-departure warning, lane-keeping assistance, forward-collision warning, and parking assistance, are listed as optional.