2016 BMW 320 SA

The vehicle is listed as a 2016 BMW 320i sedan with a salvage-title designation. The auction identifies the primary damage as “FRONT END.” Stage 1 reports that the visible front-end damage supports this auction damage code; however, the salvage-title status cannot be confirmed from exterior photographs. The left front corner has extensive severe damage. The left front fender is heavily crushed and torn around the wheel opening, while the front bumper assembly is torn, displaced, and partially detached, exposing components behind it. The left headlamp assembly is missing, leaving an open cavity with visible wiring and internal parts. The lower front bumper opening and trim are broken or missing, the left kidney grille section is absent, and the front-left edge of the hood is raised and uneven. The overall left front fascia has substantial broken and missing material. The left rear side also shows severe collision damage. The left rear door and quarter panel are extensively deformed, with deep creasing and inward crushing. The left rear quarter panel is crushed around the wheel opening, and the rear door skin has a large irregular dent with sharp creases below and behind the handle. The left rear lamp area has broken or missing sections, with green-colored backing visible behind the assembly. The exterior fuel-filler door is missing, leaving the filler housing exposed. Light horizontal scuffing and scratches are visible across the rear bumper cover. According to the VIN decode, this is a BMW 320i, model year 2016, with a four-cylinder 2.0-liter gasoline engine and a listed engine output of 181 horsepower. It is identified as a four-door sedan manufactured by BMW AG at the Rosslyn plant in South Africa. The decode also lists front, side, curtain, and knee airbags, as well as driver and front-passenger seat-belt pretensioners. Drive type and transmission information were not provided. The visible damage is extensive at both the left front and left rear sections. A complete inspection should include the underlying body structure, suspension and steering components, wheel and tire areas, cooling and lighting systems, wiring, airbags and restraint systems, fuel-filler components, and mechanical operation before purchase or repair planning.