2016 BMW 320 SA

The 2016 BMW 320i is listed with a Certificate of Title condition and an auction primary-damage classification of FRONT END. The front-end classification is supported by the visible evidence reported in the inspection findings. The Certificate of Title condition is an administrative status and cannot be verified from the available images. The vehicle has severe front-end collision damage. The hood has extensive sharp creases, deep depressions, and distorted front edges. The front bumper cover and lower fascia are extensively deformed, with open gaps and displaced lower grille trim. The center kidney grilles have broken or missing sections, and both headlamp areas are displaced with uneven gaps and visible damage to their mounting and surrounding components. Additional severe deformation is visible beneath the hood, where front-end components and open gaps are exposed above the headlamps and grille. A large plastic air-duct or shroud cover in the front of the engine bay is split and broken. These findings indicate that repairs will likely require replacement or realignment of multiple exterior and underlying front-end components; the condition of structural, cooling, lighting, electrical, and mechanical systems cannot be determined from the provided findings alone. A small light-colored paint scuff is also present on the left front door. According to the VIN decode, this is a BMW 320i sedan manufactured by BMW AG in South Africa. It is equipped with a 2.0-liter, four-cylinder gasoline engine, with a listed output of 181 horsepower. The vehicle has front and side airbags for the first row, curtain airbags for the first and second rows, knee airbags for the driver and front passenger, seat-belt pretensioners, and direct tire-pressure monitoring. The VIN decoded cleanly, including a valid check digit.