2024 BMW 228XI xDrive GC

The auction record lists the vehicle with a “CERTIFICATE OF TITLE” condition and “FRONT END” as the primary damage classification. Stage 1 reports that the visible damage at the front-left corner supports the stated FRONT END classification. The certificate-of-title status itself could not be verified from photographs. The front-left bumper cover has a large torn and partially missing section. The lower corner opening and internal areas behind the bumper are exposed. The front-left fender is pronouncedly creased and deformed around the wheel arch and forward edge, with an irregular panel surface. The front-left edge of the hood has an uneven contour and a raised gap relative to the adjacent body panels. The provided findings identify visible exterior collision damage at the front-left corner. They do not establish the condition of components behind the damaged bumper, the lighting and driver-assistance systems, the wheel and suspension, or the vehicle’s mechanical and structural condition. These areas should be inspected before purchase and repair. The VIN decodes as a 2024 BMW 228i xDrive Gran Coupe sedan, manufactured by BMW AG in Germany. It is equipped with a gasoline 2.0-liter four-cylinder engine, rated at 228 horsepower, and all-wheel drive. The decoded equipment includes standard ABS, electronic stability control, traction control, front and side-curtain airbags, forward-collision warning, pedestrian automatic emergency braking, blind-spot monitoring, lane-departure warning, rear automatic emergency braking, rear visibility assistance, and parking assistance. Damage-related inspection should confirm the condition and calibration of any affected sensors, cameras, lighting, and restraint-system components.