2016 BMW 228 xDrive

The vehicle is listed with a salvage title designation and an auction primary-damage code of “FRONT END.” Stage 1 reports that the visible evidence supports the FRONT END classification: the front bumper, grille, headlamp assemblies, and front fender panels are missing, with internal front-end components exposed. The salvage-title status itself cannot be confirmed from photos alone. Severe damage is concentrated at the front of the vehicle. The bumper cover, grille panels, outer front-end trim, and both headlamp units are absent. The radiator, intercooler, wiring, and other internal components are exposed. Front bumper mounting and support components in the lower front-left area are visibly displaced and deformed, while loose or displaced mounting pieces are also visible at both front corners. The outer front fender panel is missing around the visible front wheel, exposing the wheel-arch and inner front-end components. At the left rear corner, the rear lamp assembly is missing, leaving wiring visible, and the rear bumper cover is separated from the body with an open gap and exposed components. The windshield has multiple branching cracks and impact-like fracture lines across the upper central and passenger-side areas. According to the VIN decode, this is a 2016 BMW 228i xDrive coupe manufactured by BMW AG in Germany. It has a 2.0-litre, four-cylinder gasoline engine and all-wheel drive. The listed VIN is WBA1G9C51GV599366. The extent of the visible damage means that substantial parts replacement and structural, electrical, cooling-system, lighting, windshield, and safety-system inspections will be required before the vehicle can be considered roadworthy. Mechanical or hidden damage cannot be determined from the supplied findings.