2016 AUDI A7 3.0T PREMIUM PLUS

The 2016 Audi A7 is listed by the auction with a Salvage condition and “Front End” as its primary-damage code. These are unverified auction designations. Stage 1 reports that the visible severe front-end damage supports the “Front End” code and is consistent with a salvage condition, but notes that the salvage title itself cannot be independently verified from photographs. The vehicle has extensive front-end collision damage. The hood is severely depressed and sharply creased near the front center-left, with multiple creases, torn paint, and chips along the leading edge. The front bumper cover is torn and broken across the center and left side, with multiple openings exposing components behind it; sections of the lower bumper cover are missing. The grille is also severely broken and displaced on the left and center, with open gaps and separation from the surrounding bumper trim. The lower portion of the left headlamp has broken or separated trim and an irregular damaged edge. Additional bumper sections near the left side are missing, exposing the circular tow-hook fitting and mounting areas. There is a pronounced open gap and broken edge at the junction between the hood, left fender, and headlamp. Visible front heat-exchanger fins in the radiator/condenser area are substantially crushed and deformed across the center and lower section. Black plastic support and trim components in the upper radiator/grille support area are broken, with irregular edges and open gaps. Further inspection is required to determine the condition of concealed cooling, structural, electrical, and mechanical components. Multiple airbags are visibly deployed, including the driver steering-wheel airbag, the passenger dashboard airbag, and curtain airbags along both the right-side roof/front-door area and the left rear roof and side-window area. The restraint system will require comprehensive inspection and repair, including the airbags, related sensors, control modules, wiring, and possibly seat-belt pretensioners. NHTSA decoding identifies this vehicle as a German-built 2016 Audi A7 sedan/saloon with Audi’s 3.0-liter six-cylinder gasoline engine, automatic transmission, and all-wheel drive. The decoded trim is quattro Premium Plus. NHTSA records list three recalls for the 2016 Audi A7: a fuel-rail recall for potential fuel leakage and fire risk; a passenger-occupant-classification-system recall that could affect passenger-airbag deployment; and a head-curtain-airbag recall concerning proper deployment. The supplied records do not indicate whether any of these recalls have been completed. Verification with Audi using the VIN is recommended before purchase, together with a full post-collision inspection and repair estimate.