2023 TOYOTA TUNDRA Limited

The auction record lists the primary damage as FRONT END. Stage 1 reports that the visible evidence supports this damage classification; however, the CERTIFICATE OF TITLE status cannot be confirmed from photographs. The vehicle has severe front-end collision damage. The hood is raised and heavily creased across the front section, with folding and an irregular edge above the grille and headlamp areas. Large portions of the front bumper cover, grille surround, and adjacent trim are missing, exposing internal components. A black lower fascia section is detached and hanging below the bumper. The front corner on the image-right side is extensively damaged, with missing outer fascia, exposed internal components, and broken or detached plastic around the headlamp and bumper. The corresponding headlamp assembly is incomplete, with the lamp and surrounding parts absent or broken. The front-end assembly is generally incomplete at the center and image-right corner. The driver airbag has deployed from the steering wheel, and additional restraint fabric is hanging from the lower-left dashboard or driver-side area. The instrument cluster displays “Parking Support Brake Malfunction Visit Your Dealer” along with multiple illuminated warning indicators. The vehicle should not be considered road-ready without a comprehensive inspection and repair of the body structure, front-end systems, lighting, airbags, restraints, wiring, sensors, and electronic control systems. The provided findings do not establish the condition of the engine, transmission, frame, suspension, cooling system, or other concealed components. According to the VIN decode, this is a 2023 Toyota Tundra Limited pickup with 4WD, a 3.4-liter six-cylinder gasoline engine, and a reported 389 horsepower. It was manufactured by Toyota Motor Manufacturing, Texas, in the United States. The VIN data also lists standard driver-assistance and safety equipment, including front airbags, curtain and side airbags, forward-collision warning, lane-departure warning, lane-keep assistance, parking assistance, rear cross-traffic alert, and a rear visibility system; the condition and functionality of these systems cannot be confirmed from the findings. The NHTSA recall information provided identifies campaigns 22V854000, 23V633000, 23V757000, and 24V548000 concerning potentially inaccurate load-capacity labels on vehicles equipped with certain bed liners or accessories. Campaign 23V111000 concerns instrument-cluster software that may cause the display to go blank. Campaign 23V142000 concerns an accessory tonneau cover that may detach. Campaign 23V468000 concerns a potentially insufficiently welded spare-tire carrier chain. Campaign 23V566000 concerns a fuel tube that may chafe against brake lines and leak. Campaign 24V125000 concerns unexpected vehicle movement while in Neutral. Campaign 24V381000 concerns possible V35A engine main-bearing failure, which may cause an engine stall and loss of drive power. Campaign 25V322000 concerns moisture entering the reverse-light assemblies, and campaign 25V657000 concerns a software error that may prevent the rearview image from displaying in Reverse. Campaign 25V767000 expands the V35A engine-bearing recall and calls for inspection, with engine replacement if necessary. Recall completion should be verified by VIN with Toyota or an authorized dealer, and any outstanding repairs should be completed before operation.