2025 TOYOTA TACOMA

This 2025 Toyota Tacoma is listed with a salvage vehicle title and an auction primary damage classification of “REAR END.” Stage 1 reports that the visible evidence supports this classification: the rear bumper and right rear taillight are missing, with rear wiring and mounting components exposed. The rear bumper assembly is absent, exposing the rear crossmember, hitch receiver, brackets, exhaust outlet, and related mounting areas. Loose electrical wiring is hanging around both rear bumper mounting areas. The right rear taillight is missing, leaving the lamp cavity, wiring, and mounting structure exposed. The right rear bed corner has an irregular exposed edge near the open taillight mounting area. Several detached black and blue exterior plastic components are on the ground nearby; these parts show scratches, abrasion, and damaged or separated mounting points. Light linear scuff and abrasion marks are also visible along the lower portions of the left- and right-side doors, the rocker areas, and the right rear bedside. The findings do not establish the condition of concealed structural components, suspension, exhaust, drivetrain, electrical systems, or other mechanical parts. A complete physical inspection and functional check are recommended before purchase, including inspection and repair of the rear wiring and lighting circuits. The VIN decode identifies the vehicle as a 2025 Toyota Tacoma pickup with 4WD, a 2.4-liter turbocharged four-cylinder gasoline engine rated at 278 hp, and a Double Cab configuration. The vehicle was manufactured by Toyota Motor Manufacturing de Baja California in Tijuana, Mexico. The supplied NHTSA recall information lists four recalls applicable to certain 2025 Tacoma vehicles. Recall 25V058000 concerns possible damage to the rear brake hoses on 4WD models, which may cause a brake-fluid leak; the stated remedy is replacement of both rear brake hoses. Recall 25V595000 concerns instrument-cluster software that may fail to display vehicle speed, brake-system, and tire-pressure warnings; the stated remedy is a free software update. Recall 25V656000 concerns possible deformation and breakage of the front driveshaft CV joints; the stated remedy is inspection and replacement of both front driveshaft assemblies as necessary. Recall 26V179000 concerns inaccurate load-carrying-capacity labels; the stated remedy is replacement of the label. Recall completion should be verified with Toyota or an authorized dealer using the VIN before the vehicle is operated.