2025 TOYOTA TACOMA

The auction record identifies this vehicle as having a salvage certificate of title, with “FRONT END” listed as the primary damage. Stage 1 reports that the visible evidence supports the front-end damage claim: the front bumper, grille, headlamp assemblies, and front fender panels are absent. Stage 1 also notes that the salvage-title status cannot be confirmed from the photos. The front bumper cover and outer fascia are missing, exposing the bumper reinforcement and internal front-end components. The grille is absent, leaving the radiator and other front-end structure visible. Both headlamp assemblies are missing, with wiring and mounting areas exposed at the front corners. The left and right front fender outer panels are also absent, exposing the wheel-well and inner front-end areas. Electrical wiring and connectors are visibly exposed and hanging at the left front corner. In addition, the exterior handle is missing from the left rear door, leaving an opening in the door panel. The VIN decode identifies this as a 2025 Toyota Tacoma pickup with 4WD, a 2.4-liter four-cylinder gasoline engine, and a T24A-FTS engine, manufactured in Mexico. The decoded data does not provide a transmission type or trim level. The records provided list four NHTSA safety recalls for this model and year. One concerns possible damage to the rear brake hoses on 4WD Tacomas, which could cause a brake-fluid leak and reduced braking ability. Another concerns instrument-panel software that may fail to display vehicle speed and certain warning indicators. A third concerns possible deformation and breakage of the front driveshaft CV joint, which may impair steering or create a rollaway risk under certain conditions. The fourth concerns an inaccurate load-carrying-capacity modification label. Recall repair status should be verified with Toyota using the VIN before purchase. Because major front-end components are missing and wiring is exposed, the vehicle requires a comprehensive inspection before repair or operation. This should include the structural front end, radiator and cooling system, lighting and electrical systems, restraint and driver-assistance systems, steering, suspension, brakes, drivetrain, and alignment.ેણ