2019 TOYOTA RAV4 HYBRID LE HV 4WD

The auction record lists the vehicle as having a salvage collision title, with “FRONT END” identified as the primary damage. Stage 1 reports that the visible hood, grille, headlamp-area, and bumper damage supports the auction’s front-end damage claim and is consistent with a collision salvage condition. The front hood panel has moderate creasing and an uneven, raised front edge, particularly at the image-right front corner. Multiple grille sections and surrounding trim are broken or missing on the image-right side, leaving open gaps and exposed areas. The inner edge of the image-right front headlamp area has jagged broken plastic components and an irregular opening. The image-right corner of the front bumper cover shows cracking, white abrasion marks, and separated or uneven surfaces. Additional front-fascia damage includes an uneven hood-to-fender gap, damaged grille trim, and scuffing and cracking on the bumper cover. According to the VIN decoding, this is a 2019 Toyota RAV4 LE HV 4WD, classified as a sport utility vehicle. It has a 2.5-liter four-cylinder hybrid powertrain using gasoline and electric propulsion, an automatic transmission, and four-wheel drive. The vehicle was manufactured by Toyota Motor Manufacturing Canada in Woodstock, Ontario. Three NHTSA safety recalls are listed for this vehicle: recall 19V544000 concerns possible brake-booster-pump failure, which may deactivate vehicle stability control and reduce braking assistance; recall 20V064000 concerns possible engine-casting porosity that may allow coolant leakage and potentially cause engine damage or an oil leak; and recall 20V286000 concerns possible cracks in the front lower suspension arms that could lead to separation from the front wheel assembly. Recall completion should be confirmed by VIN with Toyota or an authorized dealer, and the front suspension should receive particular attention during inspection because of the documented collision damage and the applicable recall. A comprehensive physical inspection is recommended before purchase, including the headlamp and grille mounting areas, bumper reinforcement, hood and fender alignment, cooling system, hybrid-system components, braking system, and front suspension.